DFS51RC

Light Source:
• Red

Connection:
• 4-Pin M8 connector

SUPPLY VOLTAGE & CURRENT
• 8-30 Vdc
• 28ma @ 24Vdc, 49ma @ 12Vdc
• Reverse polarity protected
• Transient spike protected

OUTPUT / INPUT
• Q1 - Push/Pull
• Q2 - Configurable: PNP-Source, NPN-Sink, Push-Pull, Active High, or Active Low
• 150mA output current
• Short circuit & transient spike protected
• Saturation voltage: < 0.3Vdc @ 10mA < 2Vdc @150mA

POWER-UP DELAY
• 350ms. No output pulse on power-up.

RESPONSE TIME (Dependent on Mode)
• Ultra-High-Speed (UHS) 50µs
• High-Speed (HS) 125µs
• Standard (STD) 250µs
• High-Resolution (HR) 1ms
• Long-Range (LR) 4ms
• Ultra-Long-Range (ULR) 16ms

REPEATABILITY (Dependent on Mode)
• UHS 12µs.
• HS, STD, HR, LR, ULR (15.635µs)
• Asynchronous crosstalk enabled (31.25µs)

LIGHT IMMUNITY
• High immunity to most ambient light, including high efficiency lighting and high intensity strobes.

IO-LINK ADJUSTABLE SWITCHING SENSOR
SUPPORTING:
• Fast COM3 Communications
• 1ms Cycle Time
• Smart Sensor Profile 2nd Edition
• SSP2.4 Single Value Teach
• SSP2.5 Two Value Teach
• SSP2.6 Dynamic Teach

MUTUAL INTERFERENCE REJECTION
• Asynchronous: Two sensor max. responds to
selected A or B Channel.

COMBINABLE DUAL TIMERS
• On-Delay, Off-Delay, One-Shot, Motion
• Timer range: 0.1 - 9999.9ms

EMITTER LIGHT SOURCE
• 4 element LED, Red = 660nm
• IR = 880nm (Use glass fibers only).

DISPLAY
• 96 X 16 white dot matrix OLED
• Display numerical range depended on processing mode
• UHS - 1,023
• HS - 2,047
• STD - 4,095 (default setting)
• HR - 16,383
• LR - 32,767
• ULR - 32,767 (max reading)

LED INDICATORS
• Output: Red LED. Illuminates when output is ON. Flashes when output is overloaded.
• Connector: Rear Green IO-Link status Indicator.

CONNECTIONS
• M8, 4-pin
• Attached cable: 4-wire 6ft (1.8m)

OPERATING TEMPERATURE
• 5°C to 55°C (41°F to 131°F) - Electrical.

HOUSING CONSTRUCTION
• Chemical resistant, high-impact polycarbonate

RATINGS & CERTIFICATIONS
• IP50
• CE
• UL pending