DFS61I

Light Source:
• SWIR Short-Wave Infrared

Connection:
• 6ft cable (1.8m)

SUPPLY VOLTAGE & CURRENT
• 8-30 Vdc
• 28ma @ 24Vdc, 49ma @ 12Vdc
• Reverse polarity protected
• Transient spike protected

OUTPUT
• Configurable NPN, PNP or Push-Pull
• 150mA output current
• Short circuit & transient spike protected
• Saturation voltage: < 0.3Vdc @ 10mA < 2Vdc @150mA

INPUT
• Configurable active high/low
• Transient spike protected
• Configurable function: Remote setting or commands, Interrogate, Gate, Dark-On, Lockout, and Latch Reset.

POWER-UP DELAY
• 300ms. No output pulse on power-up.

RESPONSE TIME (Dependent on Mode)
• High-Speed (HS) 250μs
• Standard (STD) 1ms

REPEATABILITY (Dependent on Mode)
• HS 50μs.
• STD 1ms

MAXIMUM RANGE (SWIR)
Opposed Mode
• HS 8.5in (216mm)
• STD 10.0in (254mm)
Proximity Mode
• HS 1.6in (40.6mm)
• STD 2.0in (50.8mm)

When anti-crosstalk is enabled maximum range specifications are reduced 30%.
Note: Opposed tests utilized: MDF-B-36T; Proximity tests utilized: MDBF-E-36T

LIGHT IMMUNITY
• High immunity to most ambient light, including high efficiency lighting and high intensity strobes.

MUTUAL INTERFERENCE REJECTION
• Asynchronous: Two sensor max. responds to selected A or B Channel.

COMBINABLE DUAL TIMERS
• On-Delay, Off-Delay, One-Shot, Motion
• Latching function
• Timer range: 0.1 - 0.9ms, 1ms - 9,999ms

LED LIGHT SOURCE
• SWIR = 1460nm (Use glass fibers with Ø2.2mm connection only).

DISPLAY
• 96 X 16 white dot matrix OLED
• Display numerical range depended on processing mode
• HS - 2,047
• STD - 8,191

LED INDICATORS
• Output: Red LED, Illuminates when output is ON.
Flashes when output is overloaded.
• Connector: Red LED, Illuminates when input wire is activated.

CONNECTIONS
• M8, 4-pin
• Attached cable: 4-wire 6ft (1.8m)

OPERATING TEMPERATURE
• 5°C to 55°C (41°F to 131°F) - Electrical.

HOUSING CONSTRUCTION
• Chemical resistant, high-impact polycarbonate

RATINGS & CERTIFICATIONS
• IP50
• CE
• UL pending