MDHRCF5

Adjustment Type:

• Potentiometer

Connection Type:

• Connector, 5-pin M12 Pigtail

Housing Type:

• Miniature Rectangular

Optical Block:

• Type F5, Plastic Fiberoptics
  Adapter for use with a wide variety of plastic fiberoptic light guides for both the proximity and opposed sensing modes.

LED Light Source

• High Intensity Red = 650nm
  Recommended for long-range proximity sensing and for use with plastic fiberoptic light guides.

Sensing Range:

• Opposed Mode with F5: 2in
• Opposed Mode with F5 and lens: 4.5ft
• Proximity Mode with F5: 0.5in using a .040in diameter fiber bundle

Supply Voltage:

• 10 to 30 VDC @ 35mA
• Reverse Polarity Protected

DC Models Output Devices:

• Provide both NPN and PNP open collector output transistors capable of sinking or sourcing up to 150mA continuous
• Short circuit protected
• Zener Diode protected to 36 volts
• Protected against falso chattering/pulsing during power up

Response Time

• 500 microseconds (light or dark)

Light Immunity:

• Pulse modulated to provide extremely high immunity to ambient light

Adjustments/Indicators:

• 4-turn clutched sensitivity adjustment
• 2-position light "on" / dark "on" selection switch
• Red LED indicator energized when light beam is established

Ambient Temperature:

• -20°C to 70°C (-20°F to 158°F)

Rugged Construction:

• Chemical resistant case, "O" ring sealed to provide moisture protection
• Epoxy encapsulated for mechanical stability
• NEMA 4X, 6P and IP67