MLEN

Adjustment Type:

   • Push Button

Connection Type:

   • Cabled, 6ft (1.8m)

Housing Type:

   • Fork

Output:

   • NPN

Supply Voltage:
• 4.75 to 30Vdc
• Polarity Protected

Current Requirements:
• 18mA (exclusive of load)

Output Transistors: 
• NPN or PNP (dependent on model)
• Outputs can sink or source up to 120mA (current limited)
• All outputs are continuously short circuit protected

Remote Set Input
• Active low (NPN) 1ma
• Transient spike protected

Response Time
• 35 microseconds

Hysteresis:
• 5%

Pushbutton Control:
• One push AUTOSET
• LT/DK inverts output
• Adjust threshold (+ or -)

LED Light Source:
• High intensity IR LED

Indicator:
• Green or Red to indicate power is on.
• AMBER during AUTOSET.
• Red when sensor's output transistors are ON, and GREEN when they are OFF. NOTE: Flashes RED when a short circuit condition exists.

Light Immunity:
• Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light.

Ambient Temperature:
• -40°C to 70°C (-40°F to158°F)

Connections
• M8, 4-pin
• Attached cable: 4-wire 6ft (1.8m)

Housing Construction
• Top lid: polycarbonate
• Output window: ABS
• Case: 50% glass filled nylon
• Buttons: silicon rubber

Ratings and Certifications
• IP65
• CE
• UL pending