OR

Adjustment Type:

• Potentiometer

Connection Type:

• Cabled, 6ft

Housing Type:

• DIN Rail

Optical Block:

• None.

LED Light Source

• Red = 660nm
  Best choice for use with plastic fiberoptic light guides. Useful when sensing translucent objects in proximity (Beam Make) mode. Useful when sensing transparent objects in fiberoptic retroreflective (Beam Break) mode. Can be polarized for retroreflective (Beam Break) sensing to reduce proxing on shiny objects. Opposed fiberoptic light guides can be polarized for sensing some translucent plastic containers; consult factory for details. Used as red filter for color perception advantages.

Sensing Range:

• Depends on Optical Block

Supply Voltage:

• 12 to 24 VDC
• Polarity Protected

Current Requirements:

• 60mA (exclusive of load)

Output Transistors:

• (1) NPN and (1) PNP sensor output transistor:
  NPN: Sink up to 150mA
  PNP: Source up to 150mA
• Momentary short circuit protection
• Outputs protected from pulsing during power up
• Light/Dark switch determines output status:
  LT = Light "ON" Operate
  DK = Dark "ON" Operate

Response Time

• Minimum duration of input event: 500 microseconds

Hysteresis:

• Set for Medium-to-Low contrast application

Light Immunity:

• Responds to sensor's pulse modulated light source - immune to most ambient light

Range Adjustment:

• 15 turn Light Source Intensity control

Ambient Temperature:

• -40°C to 70°C (-40°F to158°F)

Indicators:

• OUTPUT INDICATOR
  RED LED illuminates when the output transistors are in the "ON" state as determined by the Light/Dark switch
• BEAM STATUS INDICATOR
  GREEN LED illuminates when received light level exceeds the sensor's light state switch point
• LIGHT SOURCE INTENSITY INDICATOR
  YELLOW LED illuminates proportionally to the Light Source intensity as determined by the Range adjustment

Rugged Construction:

• Chemical resistant housing
• Waterproof ratings: NEMA 4X, 6P and IP67
• Epoxy encapsulated for mechanical strength