SPBBCV6

Din Rail Mount
PRO
Principle of Optical Operation:
Convergent
Max Sensing Range:
38.1mm
Light Source:
Blue LED
Switching Output:
NPN, PNP
Connection:
Connector, 5-pin M12
Catalog Number:
18991
$175.35

For documentation and other PRO™ models, please see our PRO™ Marketing Page.

Technical Features

Model Specific

Adjustment Type:

  • Push Button

Connection Type:

  • Connector, 5-pin M12

Housing Type:

  • DIN Rail

Optical Block:

  • Type V6, Convergent 1.5" "V" Axis
    Narrow beam optics useful for sensing small parts. Also useful for proximity sensing to minimize response to reflected light from background objects. Useable range of 1.5".

LED Light Source

  • Blue = 480nm
    Useful for detecting translucent, transparent, plastic, or glass objects in the retroreflective mode when using the R4 optical block
    Used as blue filter for color perception advantages, i.e. resolving yellow vs. white colored objects or printed registration marks

Sensing Range:

  • 1.5 in.
Family Specific

Supply Voltage:

  • 10 to 30 VDC
  • Polarity Protected

Current Requirements:

  • 45mA (exclusive of load)

Output Transistors: (Current Limited)

  • (1) NPN and (1) PNP sensor output transistor
    (1) PNP Action Alert output transistor
  • Sensor outputs can sink or source up to 150mA
  • All outputs are continuously short circuit protected
  • Action Alert PNP transistor output source up to 75mA

Response Time

  • Light/Dark state response = 300 microseconds

Hysteresis:

  • Set for high resolution – less than one bar on the Contrast Indicator

Pushbutton Control:

  • Automatic set-up routines, i.e., QuickSet/AUTOSET
  • Manual Adjustments
  • Set status of five options: LOCK, AUTOSET, LT/DK ON, Auto Trac, and 10ms TIMER

 

Indicators:

  • 5-LED Bar graph functions in one of two modes:
    1. Contrast Indicator – Displays scaled reading of sensor’s response to contrasting light levels (light to dark)
    2. Status Indicator – Displays status of 5 selectable options
  • Red LED output indicator – Illuminates when the sensor’s output transistors are “on.” NOTE: If Output LED flashes, a short circuit condition exists.
  • Amber LED – Illuminates when in the options select mode
  • Yellow LED – Illuminates when action alert is activated. Also indicates when ACT adjusts sensor

Light Immunity:

  • Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light, including indirect sunlight

Ambient Temperature:

  • -40°C to 70°C (-40°F to158°F)

Rugged Construction:

  • Chemical resistant, high-impact polycarbonate housing
  • Waterproof ratings: NEMA 6 and IP67
  • Conforms to heavy industry grade CE requirements

UL CertifiedCE Certified

Literature

Catalog Pages
Instructions

View FileEN
View FileEN

Micro Cable Selection Guide, 5-wire M12:

  • GSEC-6 - 6ft, Shielded Cable (1.8m)
  • GSEC-15 - 15ft, Shielded Cable (4.6m)
  • GSEC-25 - 25ft, Shielded Cable (7.62m)
  • GSEC-2MU - 6.5ft, Low-cost, Unshielded Cable (2.0m)
  • GSEC-5MU - 16.4ft, Low-cost, Unshielded Cable (5.0m)
  • GSEC-10MU - 32.8ft, Low-cost, Unshielded Cable (10.0m)
  • GRSEC-6 - 6ft, Right Angle Shielded Cable (1.8m)
  • GRSEC-15 - 15ft, Right Angle Shielded Cable (4.6m)
  • GRSEC-25 - 25ft, Right Angle Shielded Cable (7.62m)
  • GX-25 - 25ft, Extension Cable (7.62m)

Sensor Mounting Option:

  • SEB-3 - Stainless “L” Bracket