SPBIC

Adjustment Type:

• Push Button

Connection Type:

• Connector, 5-pin M12

Housing Type:

• DIN Rail

Optical Block:

• None
  Optical blocks available for purchase.

LED Light Source

• Infrared = 880nm
  Best choice in most opaque object sensing tasks
  Provides longest possible sensing range in either Beam Make or Beam Break sensing modes
  Best choice in hostile environments; useful in penetrating lens contamination
  Preferred for use with small glass fiberoptic light guides Note: Do not use IR light with plastic fiberoptic light guides
  Preferred when sensing dark colored objects in the proximity (Beam Make) mode, i.e., black, blue, green, etc.
  Useful in penetrating containers for verification of contents; also useful in detecting overlapped splices in dense materials
  Color perception; tends to favor blue colored objects

Sensing Range:

• Depends on optical block.

Supply Voltage:

• 10 to 30 VDC
• Polarity Protected

Current Requirements:

• 45mA (exclusive of load)

Output Transistors: (Current Limited)

• (1) NPN and (1) PNP sensor output transistor
  (1) PNP Action Alert output transistor
• Sensor outputs can sink or source up to 150mA
• All outputs are continuously short circuit protected
• Action Alert PNP transistor output source up to 75mA

Response Time

• Light/Dark state response = 300 microseconds

Hysteresis:

• Set for high resolution – less than one bar on the Contrast Indicator

Pushbutton Control:

• Automatic set-up routines, i.e., QuickSet/AUTOSET
• Manual Adjustments
• Set status of five options: LOCK, AUTOSET, LT/DK ON, Auto Trac, and 10ms TIMER

Indicators:

• 5-LED Bar graph functions in one of two modes:
  1. Contrast Indicator – Displays scaled reading of sensor’s response to contrasting light levels (light to dark)
  2. Status Indicator – Displays status of 5 selectable options
• Red LED output indicator – Illuminates when the sensor’s output transistors are “on.” NOTE: If Output LED flashes, a short circuit condition exists.
• Amber LED – Illuminates when in the options select mode
• Yellow LED – Illuminates when action alert is activated. Also indicates when ACT adjusts sensor

Light Immunity:

• Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light, including indirect sunlight

Ambient Temperature:

• -40°C to 70°C (-40°F to158°F)

Rugged Construction:

• Chemical resistant, high-impact polycarbonate housing
• Waterproof ratings: NEMA 6 and IP67
• Conforms to heavy industry grade CE requirements