XPC2WR4

Communication Type:

• RS-232 MODBUS ASCII

Optical Block:

• Type R4, Retroreflective
  Very narrow beam optics designed to sense reflectors or reflective materials at long range. Designed for Beam Break sensing.

LED Light Source

• White = Braodband Color Spectrum
  The “White Light” LED light source promotes easy detection of the largest variety of color marks printed on the largest variety of colored web materials. By combining a white LED light source, our Contrast Indicator, and the one-push AUTOSET setup, you have a winning combination of high performance with an easy to use sensor.

Sensing Range:

• 60µs: 3m +
• 125µs: 4.3m
• 450µs: 4.6m

Connection Type:

• Connector, 4-pin M12

Supply Voltage:

• 10 to 30 VDC
• Polarity Protected
• Intended for use in Class 2 circuits

Current Requirements:

• 45 milliamps (exclusive of load)

Output Transistors:

• (1) NPN and (1) PNP sensor output transistors
• Outputs sink or source up to 150 milliamps (current limit)
• All outputs are continuously short circuit protected

Remote AUTO-SET Input/AUX I/O:

• Opto isolated sinking input (10 milliamps)
• Can be configured as INPUT or OUTPUT

Response Time:

• 60µs (High Speed Mode)
• 125µs (Standard Mode)
• 450µs (Long Range/High Rez Mode)

Repeatability:

• 20μs (High Speed Mode)
• 25μs (Standard Mode)
• 50μs (Long Range/High Rez Mode)

Push Button Control:

• AUTOSET
• Manual Adjustments
• Set status of options: 10) Lock, 5–1) Five Memory Locations

Hysteresis:

• Software Configured by User; Factory Default Setting = 1

Light Immunity:

• Responds to sensor’s pulsed modulated light source – immune to most ambient light including indirect sunlight

Diagnostic Indicators:

• 10-LED dual-function bar graph operates in one of two modes:
  1. Contrast Indicator – Displays scaled reading of sensor’s response to contrasting light levels (light to dark)
  2. Status Indicator – Displays status of selectable options
• Red LED Output Indicator – Illuminates when the sensor’s output transistors are “ON” NOTE: If Output LED flashes, a short circuit condition exists
• Amber LED – Illuminates when Action Alert occurs
• Yellow LED – Illuminates during Com Activity and/or when Lock feature is enabled
• Blue LED Output Indicator - Illuminates when output is "ON" Flashes when Locate button activated on EyewareXPC Screen 2

Ambient Temperature:

• 0ºC to 70ºC (32ºF to 158ºF)

Rugged Construction:

• Chemical resistant, high impact polycarbonate housing
• Waterproof ratings: NEMA 4X, 6P and IP67
• Conforms to heavy industry grade CE requirements